L800

Electric Compact Wheel Loader

The L800 Electric Compact Wheel Loader is built for municipal, agriculture, industrial, and construction work. With a 14.1 ft³ bucket, articulated steering, and LFP battery options up to 26.5 kWh, it delivers strong loading performance and zero tailpipe emissions in a compact, maneuverable package.

1763 lbs
Rated operating capacity
6250 lbs
Operating weight
26.5 kWh
LFP battery
5-6 hrs
Working time
L800 electric compact wheel loader on a job site

OVERVIEW

The L800 is an electric compact wheel loader engineered for municipal teams, landscapers, farms, and industrial operators that need a versatile loading machine without the cost and emissions of diesel power. With a 6,250 lb operating weight, 14.1 ft³ standard bucket, 1,765 lb rated load, and 5,395 lbf maximum breakout force, the L800 handles loading, stockpile work, material handling, and general site duties with confidence in tight or sensitive work areas.

At the heart of the L800 is an LFP battery available in two capacities — 20.5 kWh and 26.5 kWh — running on a 76.8 V architecture. Lithium iron phosphate chemistry is known for its stable performance, long service life, and dependable operation in demanding environments. Charging is flexible: 12 kW DC fast charging, 6 kW AC charging, and a charging-pile system that supports 12 / 6 / 3.2 kW. The 20.5 kWh pack reaches a full charge in roughly 1.2 to 5.8 hours depending on charger; the 26.5 kWh pack in 1.5 to 7.5 hours.

The L800 is built around an articulated-steering geometry tuned for tight turning radii in urban jobsites, indoor facilities, and crowded yards. A constant-pressure hydraulic system runs at 2,685 psi with a 12 gpm gear pump and a third-function multiway valve, supporting a wide range of attachments through a single dedicated lifting circuit and tipping circuit. Maximum rated output power is 25 hp with up to 38 lb·ft of travel torque, and the working cycle completes in 9 ± 1 seconds.

Operator safety and serviceability are built in. A hydraulic power service brake, mechanical parking brake, and emergency stop button inside the cab provide multiple layers of protection. With far fewer moving parts than a diesel machine — no engine oil, no fuel system, no exhaust aftertreatment — routine maintenance is reduced and uptime improves over the life of the loader.

Zero tailpipe emissions and lower operating noise make the L800 a practical fit for municipal projects, indoor warehouses, agricultural buildings, residential developments, and other settings where diesel equipment is impractical or restricted. From construction support and landscaping to farm work, snow handling, and urban material moves, the L800 brings clean, dependable loading power to a broad range of applications.

Zero emissions
🔊Low noise
High efficiency
Easy maintenance

SPECIFICATIONS

Overall Performance

Operating weight6,250 lbs
Bucket capacity14.1 ft³ (0.52 yd³)
Rated load1,765 lbs
Maximum breakout force5,395 lbf
Tipping load (straight)≥ 4,470 lbs
Tipping load (fully articulated)> 3,630 lbs
System voltage76.8 V
Maximum rated output power25 hp (19 kW)
Maximum rated travel torque38 lb·ft

Battery

Battery typeLFP battery
Battery capacity26.5 kWh
Battery voltage76.8 V
DC charging power12 kW
AC charging power6 kW
Low-voltage electrical system12 V
Charging pile12 / 6 / 3.2 kW
Charging time (20.5 kWh)5.8 hr
Charging time (26.5 kWh)7.5 hr

Hydraulic System

TypeConstant pressure hydraulic
PumpGear pump
Rated flow12 gpm
Control valveThird-function multiway valve
System pressure2,685 psi
Total cycle time9 ± 1 sec
Lifting circuitLift, hold, lower, and stay-movable boom control
Tipping circuitBucket return, hold, and tip control

Brake System

Service brakeHydraulic power brake
Parking brakeMechanical parking brake
Emergency brakeIn-cab e-stop button

Dimensions

Overall length169.5 in
Overall length without bucket139.3 in
Center of axle to bucket pin29.0 in
Wheelbase66.9 in
Rear axle to bumper42.6 in
Overall height91.1 in
Seat height (from ground)52.6 in
Maximum operating height127.2 in
Height to hinge pin (fully raised)100.4 in
Bucket leveling height90.4 in
Dumping height72.0 in
Dumping reach16.1 in
Digging depth4.1 in
Overall width62.1 in
Wheel track40.0 in
Ground clearance10.1 in
Turning radius (over bucket)134.6 in
Turning radius (outside of tire)115.1 in
Turning radius (inside of tire)59.3 in
Steering angle42°
Rollback angle at full lift45°
Dumping angle at full lift43°
Rollback angle on ground41°

BUILT FOR ANY APPLICATION

L800 at construction sitesConstruction Sites
L800 in urban constructionUrban Construction
L800 in residential developmentResidential Development
L800 for indoor constructionIndoor Construction
L800 in warehouse operationsWarehouse Operations
L800 in industrial facilitiesIndustrial Facilities
L800 in agricultureAgriculture
L800 in landscapingLandscaping
L800 in municipal projectsMunicipal Projects
L800 in shipping ports projectsShipping Ports Projects
L800 in airport projectsAirport Projects
L800 in gardening projectsGardening Projects

WHY ELECTRIC

  • Lower daily operating cost compared with diesel equipment
  • No fuel storage, oil changes, or exhaust treatment systems
  • Quiet operation for indoor, residential, and urban jobsites
  • Zero tailpipe emissions for cleaner work environments
  • Fewer moving parts and reduced maintenance downtime

TOTAL COST OF OWNERSHIP

Save more over the life of your machine with lower energy costs, reduced maintenance, and no diesel fuel requirements.

Diesel skid steer ZM AXTON L800
012345
Time (Years)
UP TO40%SAVINGS

PUT THE L800 TO WORK ON YOUR NEXT JOBSITE

Schedule a demo and see how electric equipment can reduce operating costs without sacrificing performance.