SR910

Electric Compact Skid Steer

The SR910 Electric Compact Skid Steer is a high-output machine built for construction, landscaping, agriculture, and industrial work. With a 35 kWh LFP battery, 16 kW DC fast charging, and 43 hp rated combined power, it delivers strong payload performance and zero tailpipe emissions for demanding daily use.

2,000 lbs
Rated operating capacity
6945 lbs
Operating weight
35 kWh
LFP battery
5-6 hrs
Working time
SR910 Electric Compact Skid Steer on a job site

OVERVIEW

The SR910 is a 6,945 lb Electric Compact Skid Steer engineered for contractors, landscapers, farms, and industrial operators who need a high-output machine without the cost and emissions of diesel power. With a 16 ft³ standard bucket, 2,000 lb rated operating capacity, and 4,830 lbf maximum breakout force, the SR910 handles demanding tasks like digging, grading, loading pallets, snow removal, and material handling with confidence.

At the heart of the SR910 is an 80 V LFP battery pack delivering 35 kWh of usable energy. Lithium iron phosphate chemistry is known for its stable performance, long service life, and dependable operation in demanding work environments. With 16 kW DC fast charging, the SR910 can be charged in approximately 2.2 hours, getting crews back to work quickly. AC Level 2 charging at 3.3 kW or 6.6 kW is also supported for overnight or shop charging.

Power comes from permanent-magnet synchronous drive and hydraulic motors that produce 43 hp rated and 67 hp peak combined output. The single hydraulic motor delivers up to 27 hp peak, while two drive motors push up to 20 hp peak each. The 21 gpm constant-pressure hydraulic system runs at 3,050 psi and includes a third-function multiway valve for compatibility with a wide range of attachments.

The SR910 is built for safety and serviceability. Electrodynamic service braking, spring-applied / hydraulic-release parking brake, and an in-cab emergency stop button provide multiple layers of operator protection. With far fewer moving parts than a diesel machine — no engine oil, no fuel system, no exhaust aftertreatment — routine maintenance is reduced and uptime improves.

Zero tailpipe emissions and lower operating noise make the SR910 a practical fit for jobsites near homes, schools, hospitals, indoor warehouses, agricultural buildings, and other environments where diesel equipment is impractical or restricted. From construction support and site preparation to barn work, warehouse moves, snow removal, and municipal projects, the SR910 brings serious power and clean operation to a broad range of applications.

Zero emissions
🔊Low noise
High efficiency
Easy maintenance

SPECIFICATIONS

Overall Performance

Operating weight6,945 lbs
Bucket capacity16 ft³ (0.59 yd³)
Rated operating capacity (ROC)2,000 lb
Maximum breakout force4,830 lbf
Tipping load4,010 lbs
System voltage80 V
Combined rated power43 hp (32 kW)
Combined peak power67 hp (50 kW)
Maximum rated output torque2 × 24 lb·ft + 53 lb·ft
Maximum peak output torque2 × 125 lb·ft + 100 lb·ft

Battery

Battery typeLithium iron phosphate (LFP)
Battery capacity35 kWh
Battery voltage80 V ± 5%
DC fast charging16 kW
AC charging (Level 2)3.3 kW / 6.6 kW
DC fast charge time16 kW · 2.2 hr
AC charge time (240V)6.6 kW · 5.3 hr
AC charge time (240V)3.3 kW · 10.6 hr

Hydraulic Motor

Quantity1
TypePermanent magnet synchronous motor
Rated output20 hp (15 kW)
Peak output27 hp (20 kW)

Drive Motor

Quantity2
TypePermanent magnet synchronous motor
Rated output (each)11 hp (8.5 kW)
Peak output (each)20 hp (15 kW)

Hydraulic System

TypeConstant pressure hydraulic
PumpGear pump
Hydraulic flow21 gpm
Control valveThird-function multiway valve
System pressure3,050 psi
Total cycle time< 11 seconds

Brake System

Service brakeElectrodynamic braking
Parking brakeSpring applied / hydraulic release
Emergency brakeIn-cab e-stop button

Dimensions

Maximum operating height149.6 in
Height to hinge pin118.9 in
Height from ground to cab77.2 in
Maximum bucket leveling height112.8 in
Overall length without bucket106.4 in
Overall length with bucket134.3 in
Dumping angle40°
Maximum dumping height94.5 in
Dumping reach21.7 in
Rollback angle on ground32°
Rack angle at full lift101°
Wheelbase42.5 in
Departure angle22°
Ground clearance7.3 in
Front turning radius without bucket47.7 in
Front turning radius with bucket76.9 in
Rear turning radius70.6 in
Rear length45.7 in
Wheel track53.9 in
Width over tires64.6 in
Width over bucket70.9 in

BUILT FOR ANY APPLICATION

SR910 at construction sitesConstruction Sites
SR910 in urban constructionUrban Construction
SR910 in residential developmentResidential Development
SR910 for indoor constructionIndoor Construction
SR910 in warehouse operationsWarehouse Operations
SR910 in industrial facilitiesIndustrial Facilities
SR910 in agricultureAgriculture
SR910 in landscapingLandscaping
SR910 in municipal projectsMunicipal Projects
SR910 in shipping ports projectsShipping Ports Projects
SR910 in airport projectsAirport Projects
SR910 in gardening projectsGardening Projects

WHY ELECTRIC

  • Lower daily operating cost compared with diesel equipment
  • No fuel storage, oil changes, or exhaust treatment systems
  • Quiet operation for indoor, residential, and urban jobsites
  • Zero tailpipe emissions for cleaner work environments
  • Fewer moving parts and reduced maintenance downtime

TOTAL COST OF OWNERSHIP

Save more over the life of your machine with lower energy costs, reduced maintenance, and no diesel fuel requirements.

Diesel skid steer ZM AXTON SR910
012345
Time (Years)
UP TO40%SAVINGS

PUT THE SR910 TO WORK ON YOUR NEXT JOBSITE

Schedule a demo and see how electric equipment can reduce operating costs without sacrificing performance.